|
 |
TS 50 PROG 2 axis + table extensions 2m + Aigner integral fence
|
| MONOBLOC CAST IRON FRAME
with large table supports.
|
.
|
 |
CAST IRON TABLE
Dimensions 1m 20 x 0m 80.
Lateral cast-iron extensions and front extension bar 2m on option
Steel and aluminium plates in front of the tool with manual adjustement
SPINDLE
- Fixed spindle Ø 50mm with rings,
- Interchangeable spindle CM5 with supply of a spindle Ø 50, 40, 30mm or 1 1/4" with rings,
- Interchangeable spindle HSK F80 with hydraulicor manual unlocking (option).
Special high-speed bearings, centralized grease lubrication system in front of the machine. Electro-magnetical spindle locking, lower chip ejector.
|
|
CONTROL PANEL
Each model is fitted with an upper electrical control panel within operators reach including :
- electric spindle rise and fall with push-buttons and electronic digital display of spindle travel
on option :
- 2 axis controller for spindle and fence travel, 250 mémories per axis (model TS50 PRO)
- 2 axis position indicator for spindle and fence travel (model TS50 VISU)
|
|
 |
FENCE
Standard fence (cast iron) with safety fence plates, interchangeable splinterproofs and rulers. Fine screw adjustement for the complete fence and for the outfeed plate. Upper chip ejector and guard
|
Fence with fine adjustement by handwheel : with digital counter for the tool diameter and the depht of cut. Outfeed fence plate with fine screw adjustement. Safety fence plates with interchangeable splinterproofs and rulers. Upper chip ejector and guard
Aigner fence plates on option |
 |
 |
Motorized fence(cast iron) with linear bearings and two screws for adjustement by geared motor. Manual push-button control with electronical digital display and encoder or programmed control with memories. Outfeed fence plate with fine screw-adjustement and mecanical counter. Safety fence plates with interchangeable splinterproofs and rulers. Upper chip ejector and guard. Aigner fence plates on option
|
Hydraulic spindle unlocking with spindle HSK F80
|
 |
 |
Ringfence
Motorized fence behind the spindle
On option : lifting device to move the fence behind the table on an extension.
|
|
Technical characteristics
|
- Table dimensions
- Option
- Table height
- Distance from the spindle to the front of the machine
- Distance from the spindle to the front extension ber (max.)
- Spindle speeds
- Spindle
- Ø 50 mm fixed
- interchangeable CM5
- Stroke (Standard spindle)
- Tool diameter
- Motor :
- TS 50 standard
- Option
- TS 50 automatic
- Weight
- Overall dimensions L x l x h (mm)
- Control panel h=1680
TS 50
CE n° 0070 070B 5028 06 95
TS 50 PRO-VISU
CE n° 0070 070B 5029 05 95
Sound Emission (ISO 7960 B) :
Continuous equivalent level of acoustical pressure at the work station :
- L Aeq : 84,1 dB (A),
- L peak < 130 dB
|
1200 x 800 mm
2000 x 800 mm
890 mm
390 mm
860 mm
3000-4500-6000-9000 tr / mn
length 185 mm
Ø50, 40, 30 mm or 1 1/4"
190 mm
max. 220 mm
4-5,5 kW/ 400 Volts
5.5-7,5 kW
5,5-7,5 kW / 400 Volts
720 to 900 kg
1200 x 950 x 1050
2000 x 950 x 1050
|
Specifications and illustrations : the right of modification without notice is reserved.
|
|
|
 |
| Toupie TS 50 DIGIT + table-extensions |
|
|
|
|
|
